將您的電腦與藍牙裝置連接

在您使用像藍牙滑鼠或藍牙耳機之類的藍牙裝置前，需先將其與電腦連接。這個動作被稱為「配對」。

  1. 開啟「概覽」並輸入「藍牙」。

  2. 點一下「藍牙」以開啟該面板。

  3. 確保藍牙已啟用：標題列上的開關需設為開啟。若您的藍牙有確實開啟，進入面板後您的電腦便會開始搜尋周遭的藍牙裝置。

  4. Make the other Bluetooth device discoverable or visible and place it within 5-10 meters (about 16-33 feet) of your computer.

  5. Click the device in the Devices list. The panel for the device will open.

  6. If required, confirm the PIN on your other device. The device should show you the PIN you see on your computer screen. Confirm the PIN on the device (you may need to click Pair or Confirm), then click Confirm on the computer.

    You need to finish your entry within about 20 seconds on most devices, or the connection will not be completed. If that happens, return to the device list and start again.

  7. The entry for the device in the Devices list will show a Connected status.

  8. To edit the device, click on it in the Devices list. You will see a panel specific to the device. It may display additional options applicable to the type of device to which you are connecting.

  9. Close the panel once you have changed the settings.

頂端列的藍牙圖示

只要有藍牙裝置連接，藍牙圖示就會出現在系統狀態區。