將其他顯示器連接至您的電腦

設定外接顯示器

要設定外接顯示器，請將它連接至您的電腦。倘若系統無法立即辨識螢幕或是您想對其進行調整時：

  1. 開啟「概覽」並輸入「顯示器」。

  2. 點擊「顯示器」以開啟該面板。

  3. In the display arrangement diagram, drag your displays to the relative positions you want.

    The numbers on the diagram are shown at the top-left of each display when the Displays panel is active.

  4. Click Primary Display to choose your primary display.

    The primary display is the one with the top bar, and where the Activities overview is shown.

  5. Click on each monitor in the list and select the orientation, resolution or scale, and refresh rate.

  6. Click Apply. The new settings will be applied for 20 seconds before reverting back. That way, if you cannot see anything with the new settings, your old settings will be automatically restored. If you are happy with the new settings, click Keep Changes.

顯示模式

With two screens, these display modes are available:

  • Join Displays: screen edges are joined so things can pass from one display to another.

  • Mirror: the same content is shown on two displays, with the same resolution and orientation for both.

When only one display is needed, for example, an external monitor connected to a docked laptop with the lid closed, the other monitor can be switched off. In the list, click on the monitor you want to disable, and turn the switch to off.

加入一個以上的顯示器

With more than two screens, Join Displays is the only mode available.

  • Press the button for the display that you would like to configure.

  • Drag the screens to the desired relative positions.